www.JNZTuning.com
Quick Find
   Home > Catalog > Fluids > Redline Racing Fluids > 80301
PRODUCT INFO
Redline Friction Modifier & Break-In Additive 4 oz
[80301]
$7.99

Limited Slip Friction Modifier


Compatible with both petroleum and synthetic gear oils
Reduces break-in temps as much as 50F
Add 1oz at a time to clutch-type limited slip or posi-traction units to eliminate chatter

Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
Exceed API GL-5 specifications
Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear

MORE TECHNICAL INFORMATION
Limited-slip or Positraction units use plates or clutches to provide the proper amount of lock-up to the differential. Slippery lubricants are required to prevent chatter, but too much slipperiness causes excess wheel spin, reducing traction. For perfect traction, use Red Line 75W90NS and add the Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive until the chatter disappears.
Satisfies performance requirements of GM 1052358, Ford M2C118-A, 19B546-MA, Chrysler 4318060 and most imports.
Recommended Dosage:
Use 4% for prevention of limited slip chatter in broken-in units (typical one 4 oz. bottle) or 4 to 8% for the break-in of new differentials.
Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive will significantly reduce the friction during break-in of differentials. High temperatures encountered in break-in can destroy the hardening of the gear teeth causing rapid wear of the softened gears. This additive can reduce the break-in temperatures by as much as 50F, improving break-in conditions. Compatible with petroleum or synthetic gear oils. Red Line Gear Oils already contain this additive (except the NS).
In non limited-slip racing differentials and quick change units using the Red Line ShockProof Gear Oils an additional 3 to 6% Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive is recommended.

This product was added to our catalog on Tuesday 01 July, 2014.
Reviews
Customers who bought this product also purchased
Energy Suspension Motor Mount Set-2G DSM
Energy Suspension Motor Mount Set-2G DSM
Upper Timing Cover-2G Black
Upper Timing Cover-2G Black
OEM Power Steering Pump Seal Kit-2G DSM
OEM Power Steering Pump Seal Kit-2G DSM
Fuel Injector Clinic DSM Fuel Rail w/ -6AN Fittings
Fuel Injector Clinic DSM Fuel Rail w/ -6AN Fittings
OEM Swaybar End Link-1G Front/2G Rear
OEM Swaybar End Link-1G Front/2G Rear
OEM Swaybar End Link-2G Front
OEM Swaybar End Link-2G Front
Redline Engine Oil Break-In Additive
Redline Engine Oil Break-In Additive
Lower Timing Cover: 2G 7 Bolt Black
Lower Timing Cover: 2G 7 Bolt Black
OEM Key Blank-Mitsubishi Logo
OEM Key Blank-Mitsubishi Logo
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (47)
       Mitsubishi Fluids (13)
       Motul Fluids-> (13)
       Redline Racing Fluids (19)
       Stop Tech Fluids (2)
    Used Parts
    DSM/GVR4-> (1384)
    Evo VIII-IX-> (444)
    Evo X-> (399)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net