www.JNZTuning.com
Quick Find
   Home > Catalog > Evo X > Chassis & Suspension > Coilovers > CMT250-RR
PRODUCT INFO
K-Sport Version RR Coilovers-EVO X
[CMT250-RR]
$1,289.99

Version RR Damper System

Ksport Version RR Damper System is built specifically for road racing only. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness. Integrated with 36 levels of dampening adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts, and pillow ball upper mounts on some applications. (Race use only.)

36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Camber adjustability is included on pillow ball top mounts that allow it for the ability to adjust camber from the actual coilover, instead of a separate camber kit.

Most applications utilize an adjustable lower mount, which means you adjust height without losing suspension travel like some other coilover designs do. With the mounts and most pieces of the coilover being designed for 6061 billet aluminum the kit is lightweight, durable, and rust resistant. The steel shock body is electroplated with zinc to resist rust and the elements. The valving of each set is matched to the springs installed for unmatched ride quality and reliability.

The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube designs the Monotube dissipates heat better, allows finer dampening adjustments, and requires more expensive design process. Aeration and cavatation are a lot less common in a Monotube design, which results in a better ride.

Key Features
1. Aggressive valving and spring rates
2. Reinforced internals
3. Race applications only
4. 36-way adjustable dampening
5. Made from high quality 6061 Aluminum with T6 for increased hardness
6. Compression/Rebound adjustable
7. Adjustable spring perch for height adjustment
8. Adjustable body allowing maximum suspension travel
9. Pillow ball top mount w/ adjustable camber
10. Monotube High Pressure Design reduces oil leakage
11. Electroplated body for protection from corrosion and rust
12. One year limited warranty


Default Spring Rates
Spring Rate Front (kg/lbs):18/1008
Spring Rate Rear (kg/lbs):18/1008

***Please call or email prior to ordering to clarify the spring rates you are looking for***

This product was added to our catalog on Wednesday 04 November, 2009.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (47)
    Used Parts
    DSM/GVR4-> (1383)
    Evo VIII-IX-> (444)
    Evo X-> (399)
       Brakes-> (33)
       Chassis & Suspension-> (58)
         Anti Roll Bars (9)
         Bracing (11)
         Bushings/Alignment Kits (8)
         Coilovers (18)
         Mounts (5)
         Springs (7)
       Cooling (25)
       Driveline-> (50)
       Engine-> (56)
       Engine Control & Ignition-> (8)
       Exhaust-> (33)
       Exterior/Appearance (23)
       Fuel-> (29)
       Intake-> (36)
       Interior (15)
       Turbo Accessories-> (24)
       Turbochargers-> (9)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net