www.JNZTuning.com
Quick Find
   Home > Catalog > DSM/GVR4 > Fuel Delivery > Fuel Injectors > ID-1000.12.0
PRODUCT INFO
Injector Dynamics 1000cc Injectors-DSM & EVO 8/9
[ID-1000.12.0]
$480.99

Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.


In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.


With pressure capability in excess of 8 bar this injector has found a home in many different applications.


The ID1000 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for engines. If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take


Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at
52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR


When ordering, please specify connector preference. You have the option to choose between:
-Clips & Pins: Allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
-Pigtails: Preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
-Plug N Play Adapter: Direct plug and play adapters.

Available Options:
Connection:
This product was added to our catalog on Tuesday 26 November, 2013.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (47)
    Used Parts
    DSM/GVR4-> (1383)
       Brake Components-> (71)
       Chassis & Suspension-> (116)
       Cooling System-> (62)
       Driveline-> (238)
       Engine-> (409)
       Engine Control/Monitoring-> (93)
       Exhaust-> (59)
       Exterior/Appearance (24)
       Fuel Delivery-> (85)
         Fuel Cell (2)
         Fuel Injectors (12)
         Fuel Pressure Regulators (11)
         Fuel Pumps-> (20)
         Fuel Rails (4)
         Fuel System Accessories (26)
         Lines & Fittings (10)
       Ignition-> (20)
       Intake-> (32)
       Interior-> (6)
       Package Deals
       Racing Accessories and Equipment-> (7)
       Steering Parts (9)
       Turbo Accessories-> (145)
       Turbochargers-> (7)
    Evo VIII-IX-> (444)
    Evo X-> (399)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net