www.JNZTuning.com
Quick Find
   Home > Catalog > Evo X > Engine > Cylinder Head > Head Gaskets > 23001-AM006
PRODUCT INFO
HKS Metal Head Gasket, 1.0 MM Thick-EVO X
[23001-AM006]
$229.99

HKS metal head gaskets are engineered to resist severe levels of heat that are generated by high-horsepower and high-boost applications. All HKS head gaskets are constructed with multiple layers of steel and coated with a special fluorine rubber to provide exceptional sealing. HKS head gaskets are designed to accommodate standard and certain oversized cylinder bores.

For most applications, multiple gasket thicknesses are available to change the dynamic compression ratio for various levels of tuning and engine conditions. (Note: HKS gaskets are not designed to cure sealing problems caused by head or block irregularities.)

The HKS Stopper-Type gasket consists of the maximum layers of plates possible and utilizes a molded stopper ring around each combustion chamber opening.

Compression Ratio: 9.1:1
Bore (mm): 87.5

This product was added to our catalog on Saturday 05 December, 2009.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (48)
    Used Parts
    DSM/GVR4-> (1386)
    Evo VIII-IX-> (444)
    Evo X-> (399)
       Brakes-> (33)
       Chassis & Suspension-> (58)
       Cooling (25)
       Driveline-> (50)
       Engine-> (56)
         Bearings (3)
         Crankshaft
         Cylinder Head-> (28)
           Camshafts (6)
           Head Gaskets (6)
           Valvetrain (16)
         Engine Accessories and Dress Up  (2)
         Gaskets, Seals & Gasket Kits (4)
         Hardware (4)
         Oil Pumps, Lubrication & Filters (1)
         Pistons and Piston Rings (3)
         Rods (7)
         Stroker Kits
         Timing Components (4)
       Engine Control & Ignition-> (8)
       Exhaust-> (33)
       Exterior/Appearance (23)
       Fuel-> (29)
       Intake-> (36)
       Interior (15)
       Turbo Accessories-> (24)
       Turbochargers-> (9)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net