www.JNZTuning.com
Quick Find
   Home > Catalog > Evo VIII-IX > Brake Components > Rotors and big brake kits > A2-008
PRODUCT INFO
Girodisc 2-Piece Replacement Rear Rotor-EVO 6/7/8/9
[A2-008]
$750.00

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 12lbs vs. 14.5lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.

The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

This rotor is a direct OE replacement but do to the tight space between the rotors hardware and the caliper arching the pad is required for clearance. Please see Girodisc website showing the required cut line.

If rear pads are purchased from Girodisc or you already have rotors from us and need to replace the pads we will arch them for you before shipping them out.

When used with performance pads and hi-temp fluid, you have what amounts to a truly amazing solution to overheating or warping rotors.

Sold/priced in pairs.

This product was added to our catalog on Saturday 19 May, 2012.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (48)
    Used Parts
    DSM/GVR4-> (1386)
    Evo VIII-IX-> (444)
       Brake Components-> (43)
         Brake Lines (4)
         Misc Brake Parts (2)
         Pads (25)
         Rotors and big brake kits (12)
       Chassis & Suspension-> (46)
       Cooling System (22)
       Driveline-> (45)
       Engine-> (125)
       Engine Control and Ignition-> (16)
       Exhaust-> (38)
       Exterior/Appearance (8)
       Fuel Delivery-> (27)
       Intake-> (28)
       Interior-> (22)
       Racing Accessories and Equipment
       Turbo Accessories-> (21)
       Turbo Kits
       Turbochargers-> (3)
       Used Parts
    Evo X-> (399)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net