Quick Find
   Home > Catalog > Evo VIII-IX > Engine > Cylinder Head > Camshafts > GSC Motorsports > 6009S
GSC Power-Division Evolution 9 Mivec Camshafts

GSC Power-Division is proud to release the much anticipated S-Series Camshafts for the EVO 9 4G63T MIVEC Motor. With 2 different profiles S1 and S2 cams that provide unmatched gains for anyone with a stock turbo all the way to a large GT37 series turbo. GSC also offers a Custom S3 grind that is designed for those pushing above the S2's 900whp capabilities.

The S1 cams are designed for those with the stock turbo up to the GT30/50Trim. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 25-40whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft.

S1 Specs gsc-6009S1

Intake 268 Duration 10.98mm peak lift, Variable Centerline

Exhaust 268 Duration 10.50mm Peak Lift, 113 degree Centerline

The S2 cams are designed for those with a GT30-GT37 Turbo. No low end power is lost vs the stock cams when used with the larger turbo. The S2 cams will show gains of 40-50whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams require upgraded valve springs (check out GSC’s Chro-Molly Retainers and single valve spring kit for a perfect upgrade to your valve train). Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 550-900whp applications. Not suggested for smaller stock appearing turbo setups. S2 cams can run on Factory ECU with custom flashing.

S2 Specs gsc-6009S2

Intake 274 Duration 11.2mm peak lift, Variable Centerline

Exhaust 272 Duration 11mm Peak Lift, 115 degree Centerline

The S3 Cams are avalible in a Solid Lifter cam and a Hydraulic Lifter Cam for the Evo 4-8 4G63. These cams are ment for the 1000whp+ to take advantage of a very large turbo. these are NOT suggested for anyone running smaller than the GT42R and should not even be considered!

S3 Specs gsc-6009S3S

Solid Lifter Design

Intake 290 Duration, 220@1mm Lift,11.5mm Peak lift, Veritable Centerline

Exhaust 290 Duration, 218@1mm Lift, 11.5mm Peak Lift, 116 Centerline

S3 Specs gsc-6009S3H

Hydraulic Lifter Design

Intake 280 Duration, 220@1mm Lift,11.5mm peak lift, Veritable Centerline Exhaust 280 Duration, 218@1mm Lift, 11.25mm Peak Lift, 116 Centerline

Available Options:
This product was added to our catalog on Saturday 29 December, 2007.
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (47)
    Used Parts
    DSM/GVR4-> (1381)
    Evo VIII-IX-> (443)
       Brake Components-> (43)
       Chassis & Suspension-> (46)
       Cooling System (22)
       Driveline-> (45)
       Engine-> (125)
         Block-> (21)
         Cylinder Head-> (56)
           Cam Gears (4)
           Camshafts-> (17)
             Brian Crower (6)
             Comp Cams (3)
             GSC Motorsports (2)
             HKS (1)
             Kelford Cams (5)
           Valvetrain-> (35)
         Gaskets, Seals, and Gasket Kits (14)
         Lubrication (oil pumps, filters, (3)
         Misc (9)
         Timing Belt Kits (22)
       Engine Control and Ignition-> (16)
       Exhaust-> (38)
       Exterior/Appearance (8)
       Fuel Delivery-> (27)
       Intake-> (27)
       Interior-> (22)
       Racing Accessories and Equipment
       Turbo Accessories-> (21)
       Turbo Kits
       Turbochargers-> (3)
       Used Parts
    Evo X-> (398)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->

JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2018 JNZ Tuning Powered by OEMParts.net