www.JNZTuning.com
Quick Find
   Home > Catalog > Evo VIII-IX > Engine > Cylinder Head > Valvetrain > GSC > GSC 5041
PRODUCT INFO
GSC Beehive Valve Springs w/Titanium Retainers -DSM/EVO 8/9
[GSC 5041]
$369.99

GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring. The retainer side of the valve spring has a smaller diameter to greatly reduce coil spring surging and improve valve control even at extreme rpm levels.

Only the best materials go into the GSC Power-Division Beehive valve springs. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness. Each new design is tested to 11,000RPMS so you can rest assure that you have the best possible valve spring set available on the market.

GSC Single Beehive valve spring sets, include new 4340 Chro-molly spring seats (these won't crack like others aluminum seats) and Titanium Retainer set. This kit is capable of 11000+ RPMS, with as much as 12.5mm of lift. This is a must have for anyone pushing the limits. If you have had problems with valve float or throwing rocker arms this is the spring set that will cure your problems for good...

Seat pressure:
Seat at 1.46"= 95 pounds
.300"= 200 pounds
.400"= 250 pounds
CoilBind .560"

This product was added to our catalog on Friday 26 March, 2010.
Reviews
Customers who bought this product also purchased
Driveshaft Rebuild Kit (1G DSM/Galant VR4)
Driveshaft Rebuild Kit (1G DSM/Galant VR4)
GSC Power-Division Exhaust Valves 30.5mm (STD)-DSM/EVO 8/9
GSC Power-Division Exhaust Valves 30.5mm (STD)-DSM/EVO 8/9
GSC Power-Division Intake Valves 34mm (STD)-DSM/EVO 8/9
GSC Power-Division Intake Valves 34mm (STD)-DSM/EVO 8/9
Composite Head Gasket & ARP Stud Combo
Composite Head Gasket & ARP Stud Combo
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (48)
    Used Parts
    DSM/GVR4-> (1386)
    Evo VIII-IX-> (444)
       Brake Components-> (43)
       Chassis & Suspension-> (46)
       Cooling System (22)
       Driveline-> (45)
       Engine-> (125)
         Block-> (21)
         Cylinder Head-> (56)
           Cam Gears (4)
           Camshafts-> (17)
           Valvetrain-> (35)
             Brian Crower (7)
             Crower
             Ferrea (9)
             GSC (7)
             HKS
             Kiggly (2)
             Manley (1)
             Mitsubishi (5)
             Supertech (3)
             Topline (1)
         Gaskets, Seals, and Gasket Kits (14)
         Lubrication (oil pumps, filters, (3)
         Misc (9)
         Timing Belt Kits (22)
       Engine Control and Ignition-> (16)
       Exhaust-> (38)
       Exterior/Appearance (8)
       Fuel Delivery-> (27)
       Intake-> (28)
       Interior-> (22)
       Racing Accessories and Equipment
       Turbo Accessories-> (21)
       Turbo Kits
       Turbochargers-> (3)
       Used Parts
    Evo X-> (399)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net