www.JNZTuning.com
Quick Find
   Home > Catalog > Evo VIII-IX > Intake > Intercoolers > EVO-89-IC-Ki
PRODUCT INFO
ETS Intercooler Upgrade Kit-EVO 8/9
[EVO-89-IC-Ki]
$914.99

Features:

Pressure Checked at 35psi
Bolt on design retains crash beam (3" and 3.5")
Fills entire grill with core
Eliminates excessive piping
Full Mandrel Bent 2.5" Piping
Stainless Steel T-Bolt Clamps
3-Ply Reinforced Silicone Couplers
Short Route: Two feet shorter than stock
Lower piping flows over 20% more than stock
Upper Piping flows over 12% more than stock
24x11.5x3.0" Bar & Plate Core, 1058cfm-700hp at 79% efficiency
(Direct Replacement - Requires Minor Trimming on EVO 8 - See Pictures)
24x11.5x3.5" Bar & Plate Core, 1127cfm-750hp at 80% efficiency
(Direct Replacement - Requires Minor Trimming on EVO 8 - See Pictures)
24x11.5x4.0" Bar & Plate Core, 1219cfm-820hp at 81% efficiency
(Direct Replacement, - May require trimming of crash beam)
Recirculation kit is only needed for Short Route UICP (Stock route UICP uses stock recirculation pipe)

The ETS Lancer EVO Intercooler is the best on the market, bar none. It features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3.5"). The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps. Check out the features below:

The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our piping starts off by immediately expanding into 2.5 diameter right off of the turbo elbow. This replaces the tiny 1 3/4 factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up and transient response. With an 11% increase in cross sectional area, flow is increased as well.

Also available for those with a Front Power Brace from Cusco. We make a bolt on intercooler that fits within the brace.


Note: Stock Route Piping Does Not Clear Air Box.

Available Options:
Anodized Intercooler:
Blow Off Valve Flange:
Blow Off Valve Recirc Pipe:
ETS Stencil:
Intercooler Core Thickness:
Intercooler Style:
Piping Color:
Speed Density:
Throttle Body Size:
Upper Pipe Diameter:
Upper Pipe Routing:
This product was added to our catalog on Sunday 09 December, 2007.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (48)
    Used Parts
    DSM/GVR4-> (1386)
    Evo VIII-IX-> (444)
       Brake Components-> (43)
       Chassis & Suspension-> (46)
       Cooling System (22)
       Driveline-> (45)
       Engine-> (125)
       Engine Control and Ignition-> (16)
       Exhaust-> (38)
       Exterior/Appearance (8)
       Fuel Delivery-> (27)
       Intake-> (28)
         Intake Manifold Gaskets (2)
         Intake Manifolds (2)
         Intakes and Filters (14)
         Intercoolers (6)
         Throttle Bodies (4)
       Interior-> (22)
       Racing Accessories and Equipment
       Turbo Accessories-> (21)
       Turbo Kits
       Turbochargers-> (3)
       Used Parts
    Evo X-> (399)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net