www.JNZTuning.com
Quick Find
   Home > Catalog > Evo X > Engine > Cylinder Head > Camshafts > 20004124
PRODUCT INFO
Cosworth MX1 Camshafts-EVO X
[20004124]
$799.99


Ground from new Cosworth billets, these camshafts for the Mitsubishi EVO X will provide substantial power gains while remaining drivable in all conditions. Additionally, these can be installed using the original valve springs if the original rev limiter is retained. If the rev limited is raised, upgraded Cosworth valve springs (20004845) should be used in conjunction with these cams.

* intake duration "266" deg
* Intake lift 10.8mm
* Exhaust duration "266" deg
* Exhaust lift 10.4mm
* Excellent torque and boost response
* Broad power band
* Valve spring upgrade recommended when factory rpm limiter is raised (Cosworth part number 20004845)

This product was added to our catalog on Saturday 05 December, 2009.
Reviews
OUR PRODUCTS
    Mitsu OEM Parts
    DSM Wiring Harness Connectors (9)
    Fluids-> (48)
    Used Parts
    DSM/GVR4-> (1389)
    Evo VIII-IX-> (444)
    Evo X-> (399)
       Brakes-> (33)
       Chassis & Suspension-> (58)
       Cooling (25)
       Driveline-> (50)
       Engine-> (56)
         Bearings (3)
         Crankshaft
         Cylinder Head-> (28)
           Camshafts (6)
           Head Gaskets (6)
           Valvetrain (16)
         Engine Accessories and Dress Up  (2)
         Gaskets, Seals & Gasket Kits (4)
         Hardware (4)
         Oil Pumps, Lubrication & Filters (1)
         Pistons and Piston Rings (3)
         Rods (7)
         Stroker Kits
         Timing Components (4)
       Engine Control & Ignition-> (8)
       Exhaust-> (33)
       Exterior/Appearance (23)
       Fuel-> (29)
       Intake-> (36)
       Interior (15)
       Turbo Accessories-> (24)
       Turbochargers-> (9)
    Fabrication-> (301)
    Universal-> (120)
    Turbo Kits->
    Wheels->



JNZ Tuning
PO BOX 442
Sellersville, PA 18960
Phone: (215) 997-6850
Fax: (215) 853-8293
Email: sales@jnztuning.com

Sales & Service Hours:
Monday-Friday: 10am-6pm EST
Saturday: Service Only by Appointment
Sunday: Closed

Directions
From Route 309 North/South:
Turn onto Bergey Rd,
Travel .75 mile,
Right on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F

From 476:
Exit 31,
Left on Sumneytown Pike (Rt. 63) 0.2 mile,
Left on Forty Foot Rd (Rt. 63, Forty Foot Rd becomes Broad St) 3 miles,
Left on Main St/Cowpath Rd 0.2 mile,
Right on Bergey Rd 1.2 miles, Left on Campus Drive,
Left at end of cul-de-sac,
Follow driveway to Building F
Privacy Notice | Conditions of Use | Shipping & Returns | Contact Us

Copyright © 2017 JNZ Tuning Powered by OEMParts.net