Description
Air Inlet Temperature (AIT) Sensor Kit. 3/8″NPT. Includes: Air Temp Sensor, 3/8″NPT Aluminum Bung & Flying Lead Connector.
All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires This is important since the correct connector will give you the most accurate voltage possible.
Sensor Performance Specifications:
Accuracy: < 1.5?C / 2.7?F
Operating Temp: -40C to 135C / -40F to 275F
Resistive Range (Ω): See Table
Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
Sensor Body Material: Brass
Thread: 3/8″-18 NPT
Hex Size: 3/4″
Installation Torque: 20Nm / 15 ft-lbs
Weight: 33.3g
Supply Current: 5Vdc
Elec. Termination: Weatherproof connector. Includes mating Connector with Flying Leads